Seat Toledo 2015 - Page 169

Fuses and bulbs
Double headlight bulbs
Fig. 143 Main headlight bulbs.
Installation position of double headlight
bulbs
Side lights
Main beam headlights
Dipped beam headlights
Turn signal lights
Daylight
A
B
C
D
E
Changing side light bulbs
Fig. 144 Changing side light bulbs.
–
Raise the bonnet.
–
Remove the protective cover ››› Fig. 144
.
–
R
emo
ve the bulb holder ››› Fig. 144
1
by
pulling it outwards.
–
Remove the bulb by pulling it out and fit
the new one.
–
Installation involves all of the above steps
in reverse sequence.
–
Fit the protective cover. Make sure that the
cover fits correctly on the housing during
operation.
–
Check whether the new bulb is working.
Changing main beam headlight bulbs
Fig. 145 Changing main beam headlight
bulbs.
–
Raise the bonnet.
–
Remove the protective cover.
–
Remove connector ››› Fig. 145
1
by pulling
outward.
–
Extract the bulb and fit the replacement so
that it fits correctly into the recess on the
reflector.
–
Installation involves all of the above steps
in reverse sequence.
–
Fit the protective cover. Make sure that the
cover fits correctly on the housing during
operation.
–
Check whether the new bulb is working.
167
Technical specifications
AdviceOperationSafety