Operation
WARNING
Do not rely only on the outside temperature
indicator to verify whether the road surface is
frozen. This is because with an outside tem-
perature of +4 °C (+39 °F) ice can form on the
road - Warning of frozen road surface!
Speed warning
Adjust the speed limit while the vehicle is
stopped
Depending on the equipment package:
–
Press button
A
›››
Fig. 27 on the lever to
select
Speed warning
.
–
Press button
B
on the lever to activate the
possibility of adjusting the speed limit.
–
Press button
A
on the lever to select the
desired speed limit, i.e. 50 km/h. The
speed can be adjusted in steps of 5 km/h.
–
Press button
B
on the lever to confirm the
selected speed or wait several seconds un-
til the adjustment is automatically stored.
or
–
Turn the right-hand thumbwheel on the
multifunction steering wheel
1
›››
Fig. 28
and select
Speed warning
.
–
Press the thumbwheel on the multifunction
steering wheel to activate the possibility of
adjusting the speed limit.
–
Turn the thumbwheel on the multifunction
steering wheel to adjust the desired speed,
i.e. 50 km/h. The speed can be adjusted in
steps of 5 km/h.
–
Press the thumbwheel on the multifunction
steering wheel to confirm the selected
speed or wait several seconds until the ad-
justment is automatically stored.
Adjust the speed limit while driving
Depending on the equipment package:
–
Press button
A
››› Fig. 27 on the lever to
select Speed warning.
–
Drive at the desired speed, i.e. 50 km/h
(31 mph).
–
Press button
B
on the lever to set the cur-
rent driving speed as the speed limit. If you
want to change the speed limit, this will be
regulated in 5 km/h (mph) intervals (i.e.
the speed set at 47 km/h increases to 50
km/h or decreases to 45 km/h).
–
Press button
B
on the lever once again to
confirm the selected speed or wait several
seconds until the adjustment is automati-
cally stored.
or
–
Turn the right-hand thumbwheel on the
multifunction steering wheel
1
››› Fig. 28
and select Speed warning.
–
Drive at the desired speed, i.e. 50 km/h
(31 mph).
–
Press the thumbwheel on the multifunction
steering wheel to set the current driving
speed as the speed limit. If you want to
change the speed limit, this will be regula-
ted in 5 km/h (mph) intervals (i.e. the
speed set at 47 km/h increases to 50 km/h
or decreases to 45 km/h).
–
Press the thumbwheel on the multifunction
steering wheel once again to confirm the
selected speed or wait several seconds un-
til the adjustment is automatically stored.
Changing or resetting the speed limit
Depending on the equipment package:
–
Press button
A
››› Fig. 27 on the lever to
select Speed warning.
–
Press button
B
to reset the speed limit.
–
Press the button,
B
again to activate the
possibility of adjusting the speed limit.
or
–
Turn the right-hand thumbwheel on the
multifunction steering wheel
1
››› Fig. 28
and select Speed warning.
–
Keep the thumbwheel on the multifunction
steering wheel pressed to reset the speed
limit.
42
To Next Page
Loading...
