The essentials
Illustra-
tion
Key to ››› Fig. 38
A
Do not continue driving!
The bonnet is open or is not properly
closed ››› page 202.
B
Do not continue driving!
The rear lid is open or is not properly
closed ››› page 10.
C, D
Do not continue driving!
A vehicle door is open or is not properly
closed ››› page 107.
Warning and information messages
The system runs a check on certain compo-
nents
and f
u
nctions when the ignition is
switched on and while the vehicle is moving.
Faults in the operation are displayed on the
screen using red and yellow symbols and
messages on the instrument panel display
(››› page 32, ››› page 32) and, in some ca-
ses, with audible warnings. The display may
vary according to the type of instrument pan-
el fitted.
Priority 1 warning (red symbols)
Symbol flashing or lit; partly combined with audible
warnings.
Stop the vehicle! It is dangerous ››› in Warning
and control lamps on page 98 !
Check the function that is faulty and repair it. If necessa-
ry, request assistance from specialised personnel.
Priority 2 warning (yellow symbols)
Symbol flashing or lit; partly combined with audible
warnings.
A faulty function, or fluids which are below the correct
levels may cause damage to the vehicle! ›››
in Warn-
ing and control lamps on page 99
Check the faulty function as soon as possible. If neces-
sary, request assistance from specialised personnel.
Informative text
Information relating to different vehicle processes.
Submenu Assist systems
Assist
systems
menu
Function
Front As-
sist
Switching the monitoring system on
and off ››› page 176.
Fatigue
detection*
Switching the fatigue detection on or
off (pause recommendation)
››› page 182.
Driving data
M
emor
y
The MFD (multifunction display) shows differ-
ent v
alues for the journey and the consump-
tion.
Changing between display modes on the
MFD
●
In vehicles without multifunction steering
wheel: Press the rocker switch
on the
winds
creen wiper lever
›››
Fig. 35.
●
Vehicles with a multifunction steering
wheel:
turn the thumbwheel
›››
Fig. 36.
Multifunction display memory
The multifunction display is equipped with
three memories that work automatically: MFD
from departure, MFD from refuelling and MFD
total calculation. On the screen display, you
can read which memory is currently dis-
played.
●
Toggle between memories with the ignition
on and the memory displayed: Press the
button on the windscreen wiper lever
or the
button of the multifunction steering
wheel
.
26
To Next Page
Loading...
