Seat Toledo 2016 - Changing the Fog Light Bulbs

Emergencies
–
R
emo
v
e connector ››› Fig. 92
1
by pulling
outw
ar
d.
–
Unc
lip the retainer spring ››› Fig. 92
2
pressing clockwise and inwards.
–
Extract the bulb and fit the replacement so
th
at
the lug on the b
ase fits into the recess
on the reflector.
–
Fit the connector.
–
Fit the protective cover. Make sure that the
cover fits correctly on the housing during
operation.
–
Replace the wheel housing cover.
–
Check whether the new bulb is working.
Changing turn signal bulbs
Fig. 93 Changing turn signal bulbs.
–
Raise the bonnet.
–
T
urn the b
u
lb holder ››› Fig. 93
1
anti-
c
loc
k
wise and remove it.
–
Remove the bulb by pressing on the bulb
holder and turning it anti-clockwise at the
same time.
–
Fit the replacement bulb in the bulb holder
and turn clockwise as far as it will go.
–
Check whether the new bulb is working.
Changing daytime driving light bulbs
Fig. 94 Changing daytime driving light bulbs.
–
Raise the bonnet.
–
Turn the bulb holder ›
›
›
Fig. 94
1
anti-
c
loc
k
wise and remove it.
–
Remove the bulb by pressing on the bulb
holder and turning it anti-clockwise at the
same time.
–
Fit the replacement bulb in the bulb holder
and turn clockwise as far as it will go.
–
Check whether the new bulb is working.
Changing the fog light bulbs
Front fog light bulb
Fig. 95 Front fog light.
Fig. 96 Front fog light.
86