Fuses and bulbs
Changing the bulb on the num-
ber p
l
at
e
Removing the bulb holder
Fig. 107 Removing number plate light
Fig. 108 Changing the bulb.
–
Unscrew the screws to remove the bulb
›
›
›
Fig. 107.
–
Remove the bulb, moving it in the direction
of the arrow and outwards ››› Fig. 108.
–
Installation involves all of the above steps
in reverse sequence.
Note
Depending on how equipped the vehicle is,
the number plat
e lights may be LEDs. LEDs
have an estimated life that exceeds than that
of the car. If a light with LEDs fails, go to an
authorised workshop for replacement.
91
Technical dataAdviceOperationEmergenciesSafety
To Next Page
Loading...
