Seat toledo - Head restraints*

SEATS AND LUGGAGE COMPARTMENT ––––––––––––––––––––––––––––––––––––––––––––––––––– 2.61
HANDLING INSTRUCTIONS
Head rrestraints*
The head restraints are height adjustable
and should be set to suit the size of the
occupant. Correctly adjusted head
restraints together with the seat belts
offer effective protection. The front head
restraints can also be adjusted to a differ-
ent angle.
Adjusting hheight
•
Grip sides of head restraint with both
hands and pull up or push down.
•
The best protection is obtained when
the upper edge of restraint is
at lleast
at
eye level or higher.
Removing aand iinstalling
To remove, pull restraints up to the stop,
press button (arrow) and at the same time
take restraints out.
To remove the rear head restraint first pull
the backrest forwards a little.
To install again, push the restraint rods
into the guides until they are heard to
engage. You do not need to press the key.
B45-016CB1S-017P
All manuals and user guides at all-guides.com
all-guides.com