CARE AND MAINTENANCE –––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
3.33
TIPS AND MAINTENANCE
Note ffor vvehicles wwith aa ccatalytic
converter
Due to the high temperatures which occur
in the afterburning process, additional
heat shields are fitted over the catalytic
converter. Underbody sealant must not be
applied to these shields, the catalytic
converter or the exhaust pipes. Removal
of the heat shields is also not permissi-
ble.
Cavity ppreservation
All cavities on the vehicle which could be
susceptible to corrosion are given perma-
nent protection at the factory.
This coating does not need checking or
any subsequent treatment. Should a
small amount of wax run out of the cavi-
ties at high ambient temperatures it can
be removed with a plastic scraper and
some white spirit.
❀
If tthe wwax wwhich hhas rrun oout iis
removed wwith cclean ppetrol, hheed
the eenvironmental pprotection rregula-
tions.
To Next Page
Loading...
