What to do if SEAWARD Electronic Measuring Instruments shows LOAD TOO GREAT Err5?
If your SEAWARD Electronic Measuring Instruments displays 'LOAD TOO GREAT Err5', it indicates that the appliance under test might be drawing more than 18A. Use your discretion; if you're unsure, don't proceed with the test and seek professional advice.
How to fix HOT Err7 on SEAWARD Electronic Measuring Instruments?
If your SEAWARD Electronic Measuring Instruments displays a 'HOT Err7' message, allow the analyzer to cool down before pressing Enter to continue testing.
Why does my SEAWARD Electronic Measuring Instruments show INTERNAL FAULT Err4?
The 'INTERNAL FAULT Err4' error on your SEAWARD Electronic Measuring Instruments could be due to the analyser’s internal over temperature switch activating, especially if prolonged earth bond tests have been carried out previously. If the problem persists, the Rigel 266 plus is faulty and requires repair. Return the unit to Rigel Medical for correction of the fault.
Warnings and precautions for operating the analyser safely.
Instructions for connecting the analyser to a mains supply and initial power-on.
Details on test modes, execution, aborting, and printing results.
How to connect appliances and perform insulation tests.
Procedure for conducting the Load Test.
How to perform Earth Leakage tests, including duration and conditions.
How to perform Enclosure Leakage tests, including settings and conditions.
Safety warnings and connection instructions for Patient Leakage tests.
Troubleshooting common error messages during power-on self-tests.
General| Brand | SEAWARD Electronic |
|---|---|
| Model | Rigel 266 Plus |
| Category | Measuring Instruments |
| Language | English |
To Next Page