2
Important:
● For indoor use only.
● Battery Low Voltage: The entrypad will alert low bat-
tery when battery voltage is low. PLEASE REPLACE
THE BATTERY IMMEDIATELY.
Battery Replacement instructions
a) In the back of Entrypad you will see one 9V alkaline
battery. Take the battery out of the battery compart-
ment. Gently pull on the battery until it drops out.
b) Gently remove the connector by unsnapping it from
the two terminals on the top of the battery.
Never Pull on the Battery Leads.
c) Connect a new 9V Alkaline battery to the battery
clip.
d) Put the battery and the leads completely back into the
battery compartment.
FEATURES:
1. Manufacturer default code is 1-2-3-4-5-6.
2. Function of the Manager Code
a) Unlock safe lock system
b) Change Code
To Next Page
Loading...