Secure Liberty 100 - Table 20: Key 5 Display in Prepayment Mode

BGX501-767-R02
Liberty 100 Smart Electricity Meter Technical Reference Manual
Page 77 of 116
Manual Display in Prepayment Mode
(timeout 4 secs)
Followed by value
(timeout 4 secs)
Press key 5 to advance to the next display.
Title: Accumulated debt
(timeout 2 secs)
Followed by value
(timeout 4 secs)
Or
(timeout 2 secs)
Followed by value
(timeout 4 secs)
Press key 5 to return to the 1
st
display.
Press key B to scroll back up the display list.
No key press at the end of this display sequence will
cause the auto-cycle display to resume.
The debt amount that couldn’t be deducted for the
reasons specified in Section 5.5.5.2 will be shown as
ACCUM DEBT for accumulated debts.
NOT USED is displayed if there is no outstanding
debt or debt registers are not configured.
Table 20: Key '5' display in Prepayment mode
Key 6: Tariff name, active rate register, standing charge, tariff rates and costs
A short press of key ‘6’ will initiate the associated display sequence. After each set of information comprising a
title followed by its data, either a four (4) seconds wait or short press of the key will advance the display to the
next set of information as described below.
Title 1: Tariff name
The 1
st
set of display associated with key 6 indicating
the currently active tariff name.
The example shows that ‘
Green 20
’ is the name of