SecureAire Platinum Series User Manual

www.secureaire.com | Proudly made in the U.S.A. | MN900-500
Whole-Home Air Purication System
Installation and
User Manual
Congratulations on selecting SecureAire’s most advanced
Whole-Home Air Purication System! SecureAire’s patented
design utilizes ACTIVE Particle Control technology, proven to
capture and remove airborne contaminants from your home
while INACTIVATING™ (killing) viable airborne pathogens
including bacteria, viruses, and mold.
Safe,
Healthy,
and Clean
Indoor Air!

SecureAire Platinum Series Specifications

General

Brand	SecureAire
Model	Platinum Series
Category	Air Cleaner
Language	English

Summary

About Your SecureAire Whole-Home Air Purification System

ACTIVE Particle Control: How it works

Explains the advanced and patented 4-step process for capturing and inactivating airborne contaminants.

Before Installation

Choosing a Mounting Position

Upflow Furnace Installation Example

Step One: Review Installation Plan and Airflow Direction

Prepare for installation by reviewing the plan and confirming airflow direction for the unit.

Installation Steps: Upflow Furnace

Step Two: Remove Door and Filter

Step Three: Remove Grid Access Panel and Wire Grids

Power Supply Installation

Step Four: Pre-wire the Power Supply

Provides instructions for pre-wiring the power supply, emphasizing safety and compliance with codes.

Cabinet Connection

Step Five: Connect Cabinet to Furnace or Air Handler

Guides on securely connecting the SecureAire Air Purifier cabinet to the furnace or air handler unit.

Step Six: Connect Cabinet to Return Air Plenum

Details connecting the SecureAire Air Purifier cabinet to the return air ductwork, including vane installation.

Final Installation Steps

Step Seven: Reinstall Wire Grids and Access Panel

Step Eight: Seal Sheet Metal Joints

Step Nine: Connect Power to Power Supply

Details connecting the power supply, including using wire ring lugs and the supplied plug-in cord.

System Operation Check

Installation Checklist

System Maintenance: Filter Replacement

Step One: Turn Off System Power

Step Two: Unlatch and Remove Front Door

Step Three: Carefully Remove Used Filter

Filter Replacement Completion

Step Four: Insert New Replacement Filter

Step Five: Re-attach Door and Turn On Power