Seecode Window Cleaner 3-in-1 - Assembling the SEECODE Window Cleaner 3-in-1; Step 1: Attaching Water Reservoir; Step 2: Connecting Pole Sections

Assembling the SEECODE Window Cleaner 3-in-1
Step 1
1. Make sure that the water tube is xed in the spray head and squeegee unit „E“.
2. Attach the water reservoir „D“ clockwise to the thread of the spray head and
squeegee unit „E“.
Step 2
1. Point the telescopic rod „A“ towards the opening of the angle rod „B“ and lock it
there.