Seeed Grove Beginner Kit - Page 44

Software Code
Open Arduino IDE.
Install the U8g2 library: Navigate to Sketch -> Include Library -> Manage Libraries…
and Search for the keyword “U8g2” in the Library Manager, then install.
Copy the following code, click Verify to check for syntax errors. Verify that there are no
errors, and you can upload the code.
#include <Arduino.h>
#include <U8x8lib.h>
U8X8_SSD1306_128X64_ALT0_HW_I2C u8x8(/* reset=*/ U8X8_PIN_NONE);
void setup(void) {
u8x8.begin();
u8x8.setFlipMode(1);
}
void loop(void) {
u8x8.setFont(u8x8_font_chroma48medium8_r);
u8x8.setCursor(0, 0);
u8x8.print("Hello World!");
}
43
Grove Beginner Kit For Arduino®