Lesson 10: Sensing Movement
This is the last sensor, the triaxial accelerometer, and with this module, you can easily add motion
monitoring to your design. So we can do a lot of interesting little experiments on the basis of the
motion.
Practice: when motion is detected, the buzzer gives an alarm indicating that the object is in
motion.
Components Involved
1. Seeeduino Lotus
2. Grove 3-axis Accelerometer
3. Grove cable(if broken out)
Hardware connection
Module connection:
Default connection by PCB stamp hole.
The Seeeduino is then connected to the computer via a USB cable.
To Next Page
Loading...
