Seeed Grove Beginner Kit - Page 59

Description:
Functions to be used to read Y-axis value from the sensor.
Syntax:
LIS.getAccelerationY(). Return type: float.
Description:
Functions to be used to read Z-axis value from the sensor.
Syntax:
LIS.getAccelerationZ(). Return type: float.
Prints the 3 axis data to the serial monitor.
Demo Effect and Serial Print Result:
The 3-axis accelerator readings are displayed on the Serial Monitor.
Breakout Guide
Use Grove cable to connect Grove 3-axis Accelerometer to Seeeduino Lotus’s I2C interface
using a Grove cable (note: I2C default address is 0x4c).
58
Grove Beginner Kit For Arduino®