CD
The C D player supports audio discs, C D-R , C D-RW. Do not attempt to read C D-RO M, C Di, V C D’s, DV Ds or
DATA CDs.
Note:
Even if this portable radio-C D player is able to read C D-R and C D-RW discs, it is not possible to offer a
100% guarantee that all CD-R / RW discs can be read; playback depends on the quality and condition of
the blank discs that you use, among other things. A playback failure does not necessarily indicate that the
unit is malfunctioning.
Position the FUNC TIO N S ELEC TO R on C D (the display unit briefly displays “- - -”).
To open the C D door, raise it by p ressing the c orner marked O PEN / CLO SE.
Insert a C D, C D-R o r CD-RW d isc, printed surface facing upwards a nd gently close the C D p layer door.
Start playback by p ressing PLAY / PA USE.
Press PLAY / PA USE to PAUS E a nd P LAY. To stop C D playback, press STO P.
NOTE:
C D playback stops automatically when the CD compartment is opened, the radio function is selected or the
C D M P3 has finished.
Selec ting a d ifferent track
During playback, press NEX T or BA C K on the unit to select a track.
If you have selected a track number in S top or Pause mode, press PLAY / PA USE to resume playback.
Briefly press NEX T to pass to the next track or press NE X T several times until the desired track number
appears in the display.
Briefly press BA C K to return to the start of the current track.
Press BA C K several times to find a p revious track.
Searc hing f o r a p assage o n a t rac k
Press and hold BA C K or NEX T to read the track in fast forward mode with the v olume muted.
Release the BAC K or NEX T button periodically until you have found the desired passage (normal playback
resumes a utomatically).
Repeat
Whilst in play mode, press the R EP button once to playback the current track repeatedly.
Whilst in play mode, press the R EP button twice to playback the entire C D repeatedly.
Pro gramming o f trac k numbers
Up to 20 tracks can be programmed in any order. If desired, a given track can be programmed more than
once.
In STO P mode, press BA C K or NEX T to select a track.
When the desired track number appears, press the PR O G button once to record the track (the unit displays
"prog", briefly followed by the track number selected).
Repeat steps 1 a nd 2 to select and program the desired tracks.
To start playback of your programmed tracks, press PLAY / PA US E.
The display will show “FUL” if you attempt to program more than 20 tracks.
Pro gram c heck
In STO P mode, press the PRO G button. (the unit displays the track numbers in the order they are
programmed).
Deleting a p ro g ram
Perform any o f the following operations to delete the memory:
• O pen the C D door;
• S elect the R ADIO s ource;
• Press S TO P twice.
• Objects inside the device: make sure that no foreign objects or liquids enter the device via the ventilation holes or
other openings. Do not put anything except a compact disc into the compartment. Keep the compartment closed
when not in use to prevent dirt and dust from entering the mechanism. Foreign objects can damage the mechanism.
Furthermore, there is risk of electric shock, damage to the device and short-circuit. In case of any emergency,
immediately pull the power plug and contact a qualified service technician.
To Next Page
Loading...
General