1
HANDLING PRECAUTIONS
2
• For the IC board circuit inspections, only the logic tester is allowed. The use of a
multiple-purpose tester is not permitted, so be careful in this regard.
• When cleaning the CRT surfaces, use a soft and dry cloth. Do not apply
chemicals such as thinner, benzine, etc.
• Static electricity from your body may damage some electronics devices on the
IC board. Before handling the IC board, touch a grounded metallic surface so
that the static electricity can be discharged.
• Some parts are not designed and manufactured specifically for this game
machine.Themanufacturersmaydiscontinue,orchangethespecicationsof
such general-purpose parts. If this is the case, SEGA cannot repair or replace a
failed game machine whether or not a warranty period has expired.
To Next Page
Loading...
