EXPLANATION OF TEST AND DATA DISPLAY
9
63
• When you enter the Test Mode, fractional coin and bonus adder data is erased.
• Adjust the sound to the optimum volume, taking into consideration the
environmental requirements of the installation location.
• Removing the Coin Meter circuitry renders the game inoperable.
EXPLANATION OF TEST AND DATA DISPLAY
9
• Because of the position of the switch unit, you must assume an unnatural posture
tooperateintestmode,whichcancausepainintheshoulder,waist,etc.You
could also get caught by parts in the coin chute door, for instance, and suffer
abrasions.Haveaashlightonhandandoperateintestmodeverycarefully.
The door interior is dark and narrow and you could easily make mistakes in
operation.
• Becarefulthatangerorhanddoesnotgetcaughtwhenopening/closingthe
coin chute door.
• Do not touch any parts that are not specified in these directions. Touching
unspeciedlocationsmayleadtoelectricshockorcauseshortcircuits.
• In test mode, the seat moves in response to operations irrespective of the safety
sensor or seatbelt. There are also cases in which the seat is released from its
stationary central position (level condition). While operating in test mode, make
sure that no one other than the operator is near the cabinet. Otherwise someone
could contact or collide with the cabinet, or fall down.
• Be careful if you operate the game test mode while riding in the seat.
Indiscriminate operation could cause you to fall. For safety, in performing tests
in which the seat moves, operate the control stick and gun trigger without
standing on the base.
• When the test mode completes, initialization takes place when the power is
engaged.Exercisecautionastheseatmovesleft/right.Theseatmovesevenif
theseatbeltisunfastened.Youcouldcomeincontactwiththeseatorfalldown;
youcouldalsogetahandorngercaughtsomewhere.