Sega AV F-ZERO AX - 2 Securing in Place (Adjuster Adjustment)

−27−
2
SECURINGINPLACE(ADJUSTERADJUSTMENT)
Makesurethatalloftheadjustersareincontactwiththefloor.Iftheyare
not,thecabinetcanmoveandcauseanaccident.
Thisproducthas6castersand4Adjusters.(FIG.6.2a)Whentheinstallationpositionis
determined,causetheadjusterstocomeintocontactwiththefloordirectly,makeadjustmentsin
amannersothatthecasterswillberaisedapproximately5mmfromthefloorandmakesure
thatthemachinepositionislevel.
① Transporttheproducttothe
installationposition.
② HavealloftheAdjustersmake
contactwiththefloor.Adjust
theAdjuster'sheightbyusinga
wrenchsothatthemachine
positioniskeptlevel.
③ Aftermakingadjustment,fasten
theAdjusterNutupwardand
securetheheightofAdjuster.
FIG.6.2b ADJUSTER
FIG.6.2a BOTTOMVIEW
CASTER
ADJUSTER
FIG.6.2c
RefertothisFig.(Scale:1/100)
forthelayoutoftheplaceof
installation.
FIG.6.2d
Provideventilationspacefortheventilation
opening.
Allowmorethan70cm(approx.28in)of
spaceforcustomertraffic.
警
警
告
告
注 鞍
注 鞍
警
警
告
告
3500mm
2350mm
150mm