− − − −
24
23
22
21
20
19
18
17
16
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
The Compact Flash (CF) is a precision device. It can be damaged by heat, impact,
and static electricity. Exercise caution in handling this equipment.
STOP
IMPORTANT
Only perform this operation when performing a software upgrade, and never at any
other time.
This product uses the SystemSP board. The software upgrade procedure for this board uses
Compact Flash.
Loosen the 4 screws on the Compact Flash insertion port cover, slide upward the cover and
remove it.
With the game title sticker facing upwards and the correct way around, insert the Compact
Flash all the way into the card slot. Be sure that it is as far in as it will go.
10−7 SOFTWARE UPGRADE
Open the service door and turn the power
switch to OFF.
PHOTO10.7a
PHOTO10.7cPHOTO10.7b
PHOTO10.7ePHOTO10.7d