Sega Dinosaur King - How to Remove the Card Reader (Molded Type)

−  − −  −
−  − −  −
24
23
22
21
20
19
18
17
16
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
● When working with the machine, be sure to turn the power off. Working with the
power on can cause an electric shock or a short circuit.
● Be careful not to damage the wires. Damaged wires may cause electric shock,
short circuit, or present a risk of re.
● Do not touch undesignated places. Touching these places can cause electric
shock or short circuit.
● Do not attempt to disassemble the card reader unit. Doing so could result in
exposure to hazardous laser radiation.
● This work should be performed by the site maintenance individual or another
skilled professional. Performing work by non-technical personnel can cause
severe accidents such as electric shock.
13−2 HOW TO REMOVE THE CARD READER (MOLDED TYPE)
WARNING
！
󰴤 Turn off the main AC unit power switch.
󰴥 Remove the 8 truss screws on the control
panel.
TRUSSSCREW(8),chrome
M412
FIG.13.2a
󰴦 Being careful not to damage the cord, unplug the connector from the control panel and pull it
out of the cabinet.
CONTROLPANEL
CONNECTOR
PHOTO13.2a PHOTO13.2b