4
Loosen the 2 screws on one of the LAN cable lids on the left and right of the lower door that hold it in
place. It does not matter which one, but you should try to use the one that will keep the length of the LAN
cable coming out from the cabinet to a minimum.
5
Slide the LAN cable lid towards the center of the cabinet
and tighten the 2 screws.
6
Put the connector on the end of the 5 m LAN cable through the space opened by sliding the LAN cable lid
and into the cabinet.
7
Connect the connector on the end of the 5 m
LAN cable to the LAN port on RINGWIDE
inside the cabinet.
LAN CABLE LID
SCREW (2), black
M4 x 16, w/at & spring washers
Connect the LAN cable.
To Next Page
Loading...
