Sega Racing Classic - Limitations of Usage

5
PRECAUTIONS REGARDING INSTALLATION LOCATION
2-1 LIMITATIONS OF USAGE
● Besuretochecktheelectricalspecications.Ensurethatthisproductiscompatible
withthelocation’spowersupply,voltage,andfrequencyrequirements.Aplate
describingelectricalspecicationsisattachedtotheproduct.Non-compliancewith
theelectricalspecicationscancauseareandelectricshock.
● Thisproductrequiresabreakerandearthmechanismaspartofthelocation
facilities.Usingtheproductwithoutthesecancauseareandelectricshock.
● Besuretouseanindependentpowersupplyequippedwithanearthleakage
breaker. Using a power supply without an earth leakage breaker can cause an
outbreak
ofreifapowersurgeoccurs.
● Puttingmanyloadsononeelectricaloutletcancausegenerationofheatanda
reresultingfromoverload.
● Ensurethattheindoorwiringforthepowersupplyisratedat15Aorhigher(AC
single phase 100 V ~ 120 V area), and 7 A or higher (AC 220 V ~ 240 V area). Non-
compliance
withtheelectricalspecicationscancauseareandelectricshock.
● Whenusinganextensioncord,ensurethatthecordisratedat15Aorhigher(AC
100 V ~ 120 V area) and 7 A or higher (AC 220 V ~ 240 V area). Using a cord rated
lower
thanthespeciedratingcancauseareandelectricshock.
Electricity Consumption
MAX. 5.3 A Single phase AC 120 V, 60 Hz Area
MAX. 2.9 A Single phase AC 220 V, 50 Hz Area
MAX. 2.9 A Single phase AC 220 V, 60 Hz Area
MAX. 2.9 A Single phase AC 230 V, 50 Hz Area
MAX. 2.7 A Single phase AC 240 V, 50 Hz Area
MAX. 5.6 A Single phase AC 110 V, 60 Hz Area <TAIWAN>
2