Sega Racing Classic - System Test Mode Settings

33
EXPLANATION OF TEST AND DATA DISPLAY
9-2 SYSTEM TEST MODE
●ThedetailsofchangestoTESTMODEsettingsaresavedwhenyouexitfrom
TEST MODE by selecting EXIT from the SYSTEM TEST MODE menu. Be careful
because if the power is turned off before that point, changes to the settings will
be lost.
●
Use
withthespeciedsettings.Ifsettingsotherthanthosespeciedareused,
inappropriate operations or malfunction may occur.
In the SYSTEM TEST MODE, the main activities include checking RINGWIDE information and actions and the
setting of coin/credit. Also, a screen appears for checking screen adjustments. For details, see the RINGWIDE
Service Manual, which is provided separately.
Use the following settings with this product. If the settings are not as specied, error messages might appear and
operations might not be normal.
COIN ASSIGNMENTS
COIN CHUTE COMMON
SERVICE TYPE INDIVIDUAL
GAME COST SETTING CREDIT(S) TO START
NETWORK SETTING
NETWORK TYPE MAIN
MAIN NETWORK DHCP ENABLE
9