Sega Racing Classic - Output Test

39
EXPLANATION OF TEST AND DATA DISPLAY
9-3-4 OUTPUT TEST
1
On the GAME TEST MODE screen, select OUTPUT TEST and press the TEST Button. The OUTPUT
TEST screen appears.
This screen is for conrming the proper operation of each output device used by the game.
Periodically use this screen to check the status of each output device.
2
Each item is explained below.
Press the TEST Button on an item to change the condition to ON, turning on its indicator light. Press the
TEST Button again to change the condition to OFF, turning off the light.
3
Press the SERVICE Button and move the cursor to select the item (output device).
4
When all checks are completed, select EXIT and press the TEST Button. The GAME TEST MODE screen
reappears.
OUTPUT TEST
START LAMP OFF
LEADER LAMP
OFF
VR LAMP1 OFF
VR LAMP2 OFF
VR LAMP3 OFF
VR LAMP4 OFF
WOOFER LED R OFF
WOOFER LED G OFF
WOOFER LED B OFF
REAR LED R OFF
REAR LED G OFF
REAR LED B OFF
->EXIT
SELECT WITH SERVICE BUTTON AND PRESS TEST BUTTON
9
WOOFER LED
REAR LED
LEADER LAMP
START LAMP, VR LAMP