56
CONTROL PANEL (STEERING WHEEL MECHANISM)
11-3 GREASING
●Besuretousethedesignatedgrease.Usingundesignatedgreasecancause
parts damage.
●Do
notapplygreasetolocationsotherthanasspecied.Doingsomaycreatea
risk of operational problems and deterioration of parts.
●The
designatedperiodsforgreasingserveonlyasaguide.Wheneverthereare
squeaks or other anomalies, apply grease at designated locations.
Grease the parts listed below once every 3 months.
Use GREASE MATE (PART No. 090-0066) as spray grease.
Remove the upper door on the back of the cabinet, and apply grease to the teeth of the gears that turn the volume
axis.
11