Sega Racing Classic - Checking Microswitches

57
SHIFT LEVER
12
SHIFT LEVER
● Whenworkingwiththeproduct,besuretoturnthepoweroff.Workingwith
thepoweronmaycauseanelectricshockorshortcircuit.However,theunit
must be switched on when using TEST MODE. Do not touch any part of the unit
except
thoseareasindicated.
● Becarefulnottodamagethewires.Damagedwiresmaycauseelectricshockor
shortcircuitorpresentariskofre.
● Thisworkshouldbeperformedbythesitemaintenanceindividualorother
skilled professional. Performing work with non-technical personnel can cause
electric shock.
After replacing the switch, always go to the INPUT TEST screen in GAME TEST MODE
and check whether the switch is ON or OFF.
● Donottouchthesteeringwheelwhenswitchingontheunit.Thesteeringwheel
undergoes automatic initialization after the unit is switched on. Touching the
steering wheel could lead to injuries.
●
When
removingorattachingtheparts,becarefulthatyourhandsorngersdo
not get caught in anything.
12-1 CHECKING THE MICROSWITCHES
Check the microswitches on the shift lever once a month. At the same time, check the handling of the shift lever.
1
Display the INPUT TEST screen in the GAME TEST MODE.
2
Operate the shift lever and check that “ON” and “OFF” display properly (to the right of each shift) from
“SHIFT1” to “SHIFT4”. The shift lever has 3 microswitches. Different combinations of “ON” and “OFF”
will change the display for each shift.
12