13
ACCELERATOR & BRAKE
● Whenworkingwiththeproduct,besuretoturnthepoweroff.Workingwith
thepoweronmaycauseanelectricshockorshortcircuit.However,theunit
must be switched on when using TEST MODE. Do not touch any part of the unit
except
thoseareasindicated.
● Becarefulnottodamagethewires.Damagedwiresmaycauseelectricshockor
shortcircuitorpresentariskofre.
● Thisworkshouldbeperformedbythesitemaintenanceindividualorother
skilled professional. Performing work with non-technical personnel can cause
electric shock.
● To
preventaccidentswhileworkingorwhileoperatingtheproductafterithas
beeninstalled,besurenottoconductanyproceduresotherthanthosegiven
inthismanual.Therearecasesinwhichproceduresnotcoveredinthismanual
requirespecialtoolsandskills.Ifaprocedurenotgiveninthismanualis
required,requestservicefromtheofcegiveninthismanualorfromthepoint
of purchase.
● Carefully
readthe“UsagePrecautions”thatcomewiththegreaseusedin
periodic maintenance work and make sure that you understand them. Improper
use can lead to accidents.
Af
teradjustingorreplacingthevolume,alwaysgototheDRIVEBDTESTorINPUT
TESTscreeninGAMETESTMODEandsetthemobilityvalue.
Do not touch the steering wheel when switching the unit on. The steering wheel
undergoes automatic initialization immediately after the unit is switched on.
When the accelerator and brake pedal do not operate properly, either the volume attachment position must be
adjusted, or the volume must be replaced. Also, the gear alignment position and spring should be greased once every
3 months.