Sega Racing Classic - Volume Adjustment and Replacement

61
ACCELERATOR & BRAKE
13-1 VOLUME ADJUSTMENT AND REPLACEMENT
The appropriate value for acceleration volume is under 30H when released and over C0H when stepped on.
The appropriate value for brake volume is under 35H when released and over D0H when stepped on.
Check Volume values in the TEST mode.
Since work is performed inside the energized cabinet, be very careful so as not to touch undesignated places.
Touching places not specied can cause electric shock or short circuit.
The following tools are required for the operations below: Phillips screwdrivers for M4 and M5.
Adjustment Method
1
Remove 2 truss screws, and remove the front cover of the accelerator and brake.
2
Loosen the screw that secures the potentiobase, and adjust the volume values by moving the base.
3
Fasten the potentiobase.
4
On the INPUT TEST screen in the GAME TEST MODE, check the volume values.
5
Conrm that the values change smoothly by operating the pedal.
13
TRUSS SCREW (2), chrome
M4 x 8
FRONT COVER
SCREW (1)
M5 x 12, w/at & spring washers
POTENTIOBASE
VOLUME
220-5753