Sega Racing Classic - Cleaning the Game Board and Surrounding Parts

69
RINGWIDE (GAME BOARD)
15-1 CLEANING THE GAME BOARD AND SURROUNDING PARTS
1
Turn off the power switch of the cabinet.
2
Remove 1 truss screw each from left and right sides of Base Lid.
3
Unlock the base with the master key.
4
Turn the lock handle on Base Lid R to unlock the lid.
5
Lower the seat towards. Slowly lower the backrest until it touches the oor to prevent damage to the seat
part. Put a drop cloth on the oor to prevent damaging the surface of the seat part.
6
The game board (RINGWIDE) is inside the base. Clean it with a vacuum cleaner. Clear the RINGWIDE
exhaust vent and other surrounding RINGWIDE parts of dust. (See RINGWIDE Service Manual, Chapter 7.)
Cleanthegameboardandsurroundingpartsonceayear,orwhenan“Error0090”
or“Error0091”appears.
Clean the game board exhaust vent area and surrounding parts once a year with a vacuum cleaner.
15
M5 x 12
DROP CLOTH TO PREVENT DAMAGE
TRUSS SCREW (2), black
RINGWIDE
LOCK HANDLE
Unlock