Sega Snakes & Ladders - Cabinet Installation; Installing the Cabinet

ASSEMBLY AND INSTALLATION
14 15
ASSEMBLY AND INSTALLATION
6 6
020-000612-0C M6X12 SKT CAP CRM (2)
030-000830-SB M8x30 BLT W/S BLK (4)
030-000635-S M6x35 BLT W/S PAS (9)
These xings are located within their respective
xing points within the cabinet.
These xings are located within their respective
xing points within the cabinet.
These xings are located within their respective
xing points within the cabinet.
These xings are located within the cashbox
068-852216-0B M8 WSHR 22OD FLT BLK (4)
Required xings and where to nd them.
Fixings required for Billboard Installation.
Fixings required for Snake Body installation (located within the Snake Body segments)
Tools required for installation
• Billboardweighsapproximately10kgonceassembled.Haveatleast2people
duringthisoperation.Workingalonecouldresultinpersonalinjuries,etc.
• Toperformworksafelyandsecurely,besuretoprepareastepwhichisina
safeandstablecondition.Performingworkwithoutusingastepmayleadtoinjury
ofdamagetocomponents.
Allen Key nos 4, 5 and 6 (M5) (M6) (M8)
- Attaching Billboard Panel to Assy Billboard.
Adjustable Spanner / Wrenck
- Adjust Leg Levellers
M8 Socket wrench or Spanner
- Attaching Billboard
Step or Step Ladder
6-1 INSTALLING THE CABINET