Sega Snakes & Ladders - Snake Body and Ticket Installation

ASSEMBLY AND INSTALLATION
18 19
ASSEMBLY AND INSTALLATION
6 6
6-1-2 FITTING THE SNAKE BODY SEGMENTS
1
Remove the (6) M6x35 Hex Blt xings from the sides of the cabinet where the Snake Body sections are to
be tted.
2
Slide each section into the designated slot and fix with (3 each) M6x35 Hex Blts removed from above
instruction.
3
Once all sections have been tted into place, make connections to each section from within the cabinet.
Snake Body
Fixing Points
6-1-3 INSTALLING TICKETS
1
Ensure the machine is powered off
2
Open the Console cabinet lid to access the ticket units and ticket holders.
3
Locate the ticket unit and remove the ticket guide.
4
Using your index nger, lift the roller bar and lock it into the upper position.
This game comes with (2) ticket units installed.. The purpose of these 2 units is so that the game can operate with
twice the amount of tickets as a game with only a single unit. The ticket operation is such that when one unit
despenses its nal ticket the remainder of that win will be paid to the player via the second ticket unit. The second
ticket unit will continue to operated and pay tickets to the customer until the rst unit is relled.
Console lid
Ticket guide
Roller bar