FEATURE REEL / TRACKER
52 53
FEATURE REEL / TRACKER
11 11
5
Once all harnesses are disconnected carefully hold the Tracker unit by the handles and lift to remove.
6
To remove the band - lossen the tension from the band by rotating the tension bracket through 90 degrees.
This will enable the unit to compress slightly so that the band can be removed.
Handles
Remove the (1) M4x10 MSCR PH
Loosen the (1) M4x10 MSCR PH
Turn Bracket through 90°
7
Once the Tracker tension bracket has been repositioned, carefully push on the wheel to release the band.
8
Fit the NEW band onto the Tracker Unit in the same way by following these instructions in reverse order
Carefully push on the wheel to release the tracker band
Remove old Tracker Band
Fit new Tracker Band
To Next Page
Loading...
