Sega Snakes & Ladders - Adjusting Price of Play (Excel); Excel Credit Board Settings

COIN HANDLING
58 59
COIN HANDLING
12 12
REGIONAL AND ACCEPTOR SETTINGS (SW3)
Note: These switch settings are under constant review and may change due to world currency updates. Set SW 1 according to the option settings found in the relevant Price of Play Settings Table on the following pages. Set SW 3 on the VTS /Excel board as shown in the table above corresponding to the country required.
This product comes equipped with a Crane NRI Coin Acceptor. To adjust the price of play ALL credit setting are
adjusted via the EXCEL CREDIT BOARD.
The Credit Board is controlled by 2 DIL Switches. These allow the operator to select the price of play, type of coin
acceptor and region.
EXCEL Credit Board
12-3 ADJUSTING THE PRICE OF PLAY (EXCEL)
DIL SW3 (Regional Settings)
Adjust these switches to specify the type of Coin Acceptor used and currency.
Default = SW1&SW2 ON - NRI in parallel mode, Sterling.
TEST BUTTON Provides access to the TEST MENU when pressed.
SERVICE BUTTON Provides a SERVICE CREDIT when pressed
Status LED Flashes when functioning.
CHANNEL 1 Not Used
CHANNEL 2 To Coin Acceptor (SR3 TYPE.)
DIL SW1 (credit settings) Adjust to required price of pay.
VOL CONTROL MAIN VOLUME ADJUSTMENT (FRONT SPEAKERS)
DIP Switches
Status LED
Channel 1
Credit PCB
A/N Display
Counter
Counter
Counter
Test SW
Service SW
Volume Control
Channel 2
● The price of play isdetermined by the conguration ofswitches located
oneitheranEXCELboardorVTSboard.Thetypeofboardusedisdetermined
byproductlocation.Switchsettingsforbothtypesofboardremainthesame.