1
2
3
4
5
6
7
8
9
10
11
12
13
14
Insert power
supply into
bottom of
camera
Mount camera onto
tripod head using the screw
slot on the the bottom
On the back wall of the booth,
take a tape measure and mark
the wall with a piece of tape at 75”
Zoom out as far as possible
and line the 75" mark at the
very top of the view finder
and lock the camera.
Have a subject stand against the
back wall inside the Superbooth
and zoom in all the way.
Focus the camera on
the subject and zoom out
all of the way.
Plug the USB cable
into the left side of the camera
Set the lens
focus mode
switch to
<
MF
>
Set the power
switch to
<
ON
>
Set the mode
dial to
<
M
>
Display the menu
screen by pressing
the menu button
On the menu screen
select Quality
Under the
toolbar select
“Auto power off”
Attach the lens
Align the lens’
white or red
index mark
with the mark
on the camera
Change this setting
to
<
OFF
>
(Default is L)
Change this setting
to
<
S1
>
1
2
3
4
5
6
7
8
9
10
11
12
13
14
Insert power
supply into
bottom of
camera
Mount camera onto
tripod head using the screw
slot on the the bottom
On the back wall of the booth,
take a tape measure and mark
the wall with a piece of tape at 75”
Zoom out as far as possible
and line the 75" mark at the
very top of the view finder
and lock the camera.
Have a subject stand against the
back wall inside the Superbooth
and zoom in all the way.
Focus the camera on
the subject and zoom out
all of the way.
Plug the USB cable
into the left side of the camera
Set the lens
focus mode
switch to
<
MF
>
Set the power
switch to
<
ON
>
Set the mode
dial to
<
M
>
Display the menu
screen by pressing
the menu button
On the menu screen
select Quality
Under the
toolbar select
“Auto power off”
Attach the lens
Align the lens’
white or red
index mark
with the mark
on the camera
Change this setting
to
<
OFF
>
(Default is L)
Change this setting
to
<
S1
>
1
2
3
4
5
6
7
8
9
10
11
12
13
14
Insert power
supply into
bottom of
camera
Mount camera onto
tripod head using the screw
slot on the the bottom
On the back wall of the booth,
take a tape measure and mark
the wall with a piece of tape at 75”
Zoom out as far as possible
and line the 75" mark at the
very top of the view finder
and lock the camera.
Have a subject stand against the
back wall inside the Superbooth
and zoom in all the way.
Focus the camera on
the subject and zoom out
all of the way.
Plug the USB cable
into the left side of the camera
Set the lens
focus mode
switch to
<
MF
>
Set the power
switch to
<
ON
>
Set the mode
dial to
<
M
>
Display the menu
screen by pressing
the menu button
On the menu screen
select Quality
Under the
toolbar select
“Auto power off”
Attach the lens
Align the lens’
white or red
index mark
with the mark
on the camera
Change this setting
to
<
OFF
>
(Default is L)
Change this setting
to
<
S1
>
SuperBooth Parts List
Product # Description Qty
BG-192001 40" Monitor 1
BG-192002 32" Monitor 1
BG-192003 6.5" Speakers 4
BG-192004 Audio Amplifier 2
BG-192005 Large LED Lights 2
BG-192006 DNP Printer 2
BG-192007 Subwoofer 1
BG-192008 Blower Fan 1
BG-192009 1000 Stack DBA 1
BG-192010 12V Power Supply 1
BG-192011 Digital Camera 1
BG-192012 11-Outlet Power Strip 1
BG-192013 White Box Power Strip 1
BG-192014 White Box Outlet Splitter 1
BG-192015 Credit Board w/Wire Harness 1
BG-192016 Rede Up/Down Buttons 2
BG-192017 Orange Select/Start Button 1
BG-192018 Camera Power Adapter 1
BG-192019 DBA Wire Harness 1
BG-192020 LED Strobe Lights 9
BG-192021 LED Strobe Light Controller 1
BG-192022 LED Strip Light [1] 1
BG-192023 LED Strip Light [2] 1
BG-192024 LED Strip Light [3] 1
BG-192025 LED Strip Light [4] 1
BG-192026 DBA Lock Box 1
BG-192027 Curtain Rod 1
BG-192028 Metal LED Light Accent 2
BG-192029 Metal Camera Accent 1
BG-192030 Metal Blower Accent 1
BG-192031 Metal Wall Speaker Accents 2
BG-192032 Black Door Speaker Accents 2
BG-192033 Large LED Light Box 2
BG-192034 Camera Trim Ring 1
BG-192035 40" Plexiglas 1
BG-192036 32" Plexiglas 1
BG-192037 Right Angle Bracket 20
BG-192038 Metal Camera Arm 1
BG-192039 Camera Swivel Mount 1
BG-192040 TV Mounting Bracket 1