Sega The Maze of the Kings - Page 63

60
GUN ADJUSTMENT Screen
ä
RIGHT aa bb
Sets the right horizontal limit correction value.
The left indicator (aa) shows the previous value and the right indicator (bb) shows the newly-input value.
Point the Gun Controller at the right edge of the screen, aiming at the square mark, and pull the trigger
to set the correction value. Vertical movement has no effect on the values in this case.
ä
TOP aa bb
Sets the upper vertical limit correction value.
The left indicator (aa) shows the previous value and the right indicator (bb) shows the newly-input value.
Point the Gun Controller at the upper edge of the screen, aiming at the square mark, and pull the trigger
to set the correction value. Horizontal movement has no effect on the values in this case.
ä
BOTTOM aa bb
Sets the lower vertical limit correction value.
The left display (aa) shows the previous value and the right display (bb) shows the newly-input value.
Point the Gun Controller at the lower limit of the screen, aiming at the square mark, and pull the trigger
to set the correction value. Horizontal movement has no effect on the values in this case.
ä
CENTER X aa bb
Y aa bb
Sets the center correction value.
X indicates the horizontal and Y indicates the vertical. The left display (aa) shows the previous value and
the right display (bb) shows the newly-input value.
Point the Gun Controller at the center of the screen, aiming at the square mark, and pull the trigger to
set the correction value.
ä
LEFT aa bb
Sets the left horizontal limit correction value.
The left display (aa) shows the previous value and the right display (bb) shows the newly-input value.
Point the Gun Controller at the left edge of the screen, aiming at the square mark, and pull the trigger to
set the correction value. Vertical movement has no effect on the values in this case.