49
COIN SELECTOR
15
COIN SELECTOR15
15-1 REMOVING THE COIN SELECTOR
PHOTO 15-1a
1. Turn the power off.
2. Unlock with the operator’s key and open the service
door.
PHOTO
15-1b
3. Loosen the thumbscrew on the back of the coin
selector.
PHOTO
15-1c
4. Push up the stopper that holds the coin selector in
place.
• Before performing work, be sure to turn the power off and unplug the electrical
cord from the outlet. Performing the work without turning the power off can
cause an electric shock or short circuit.
• Be careful not to damage the wires. Damaged wires may cause an electric
shock, short circuit or present a risk of fire.
To Next Page
Loading...
