52
REPLACEMENT OF FLUORESCENT LIGHTING, LAMPS, AND FUSES
16
REPLACEMENT OF FLUORESCENT LIGHTING, LAMPS, AND FUSES
16
16-1 FLUORESCENT LIGHTING REPLACEMENT
Replacement of Fluorescent Ceiling Lamps
FIG. 16-1
Remove fluorescent ceiling lamps by pushing them toward the right and replace.
Replacement of Fluorescent Lamps on Sides
The work must only be carried out by personnel with electrical appliance
knowledge. Shocks and other serious accidents may result if the work is carried
out by unqualified individuals.
• Before performing work, be sure to turn the power off and unplug the electrical
cord from the outlet. Performing the work without turning the power off can
cause an electric shock or short circuit.
• Use lamps of the specified ratings. Using lamps with different ratings may cause
fires or damage.
• You may get burned by a hot fluorescent lamp or other lamps. Pay full attention
to the lamps when performing the work.
• There is the danger of accidents involving electrical shorts circuits or fire caused
by factors such as the deterioration of insulation in lighting equipment over time.
Check that there are no anomalies such as the following: odors from burning,
socket discoloration, frequent lamp replacements.
To Next Page
Loading...
