67
OPTIONAL ITEMS
21
PHOTO 21-2g
7. Set the spacer in the coin security bar and secure it in place on the cabinet with the 3 flange nuts that were
removed.
8. Close both the left and right service doors.
BILL SECURITY BAR INSTALLATION
PHOTO 21-2i
1. Turn the power off.
2. Unlock with key and open the left bill validator door.
PHOTO
21-2j
3. Remove the 3 flange nuts on the inside of the bill validator door, then remove the 3 carriage bolts from the cabinet
front side. Be careful not to drop or lose the flange nuts.
PHOTO
21-2h
PHOTO
21-2j PHOTO 21-2k
To Next Page
Loading...
