71
OPTIONAL ITEMS
21
6. Pass the power cable through the hole on the underside of the LCD CASE and connect it to the AC Adapter.
Bundle the cables and secure them in place with a cable tie.
PHOTO
21-3h PHOTO 21-3i
NOTE: Tune the monitor before assembly. After attaching the monitor to the inside panel, the tuning button becomes
hidden, and tuning may become difficult.
INSTALLATION OF LCD UNIT ON CABINET
1. Remove the 2 truss screws from inside the cabinet.
PHOTO
21-3j
2. Remove the 2 tamperproof screws on the left and
right of the cabinet rear panel.
PHOTO
21-3k
To Next Page
Loading...
