Sega Virtua Striker 4 - Card Test Operation

−33−
d.CARDTEST
Thisperformsanoperatingcheckonthecardreader/writer.
* If the CARD R/W 1P (2P) USE setting on the GAME ASSIGNMENTS screen is set to "OUT
OF SERVICE" or "OFF", the operation of the card reader/writer cannot be tested.
UsetheSERVICEButtontomovethecursortoREAD/WRITETESTandinsertthededicated
cardinthereader/writer,andtheREAD/WRITEtestwillbegin.
Thedisplaychangesto"NOWACCESS",andifthereisanormalVS4PLAYER'sCARD,this
changesto"READSUCCESS",andifthereisanerror,thischangesto"READERROR".
IftheREADTESTissuccessful,themachinechangestotheWRITETEST.
IftheWRITETESTissuccessful"WRITESUCCESS"isdisplayed,andifitfails"WRITE
ERROR"isdisplayed.
PresstheTESTButtononLOCKON/OFFandtheLOCKandSWitemsatthetopofthescreen
willchangebetween"ON"and"OFF".
MovethecursortoEXITandpresstheTESTButtontoreturntotheGameTestMenuScreen.
* If a card R/W has not been installed on one of the P1 or P2 sides, or an initialization error
occurred in one of the card R/W, the CARD TEST display for that side will be cleared.
* If a card R/W has not been installed on both of the P1 and P2 sides, or an initialization error
occurred in both of the card R/Ws, the message "CARD R/W NOT FOUND." is displayed. You
cannot run the card test, so you should select EXIT and skip this screen.
CARDTEST
CARDP1:SWOFF:LOCKOFF
:INSERTCARD
READ/WRITETEST
LOCKON/OFF
CARDP2:SWOFF:LOCKOFF
:INSERTCARD
READ/WRITETEST
LOCKON/OFF
->EXIT
SELECTWITHSERVICEBUTTON
ANDPRESSTESTBUTTON