Sega Virtua Striker 4 - Turning the Power On

−4−
3. TURNING THE POWER ON
Donotdisconnectthepowerduringthefirmwareupgrade.Ifthepoweris
cut,theTRIFORCEmaybedamaged.
WARNING
BOOT/FIRMVERSIONDOESNOTFULFILL
THEGAMESPEC.
PLEASEENTERGAMETESTANDUPDATE.
VIRTUASTRIKER4TESTMENU
INPUTTEST
GAMEASSIGNMENTS
CALIBRATION
CARDTEST
CLOSESETTING
SYSTEMUPDATE
BOOKKEEPING
BACKUPDATACLEAR
->EXIT
SELECTWITHSERVICEBUTTON
ANDPRESSTESTBUTTON
① Turnthepoweron.
Ifthefirmwareneedstobeupgraded,proceedtostep(2)below,andiftheupgradeisnot
needed,proceedtostep(7).
② IftheTRIFORCEfirmwareneedstobeupgraded,thefollowingwarningmessageisdisplayed.
③ EnterGAMETESTMode.(SelectENTERGAMETESTontheSYSTEMMENU.)