3
2
1
Tap ‘Create a map’ to start mapping.
Make sure the mower is powered on. With Bluetooth connection,
your phone will connect to the mower automatically.
ON
Note: If the mower is in lock status, you must enter the PIN
code before operating the mower. The default code is 0000 and
can be reset via the Navimow app.
4
Angle: Make sure to follow a straight line with a smooth turning
angle of no smaller than 90°.
Walk along the edge.
5
＜90°
＞90°
＞90°
＞90°
＞90°
＞90°
Find a proper starting point along the edge of your lawn. Keep
within 6 m (19.7 ) from the mower during the mapping process.
Calibrate the mower to ensure accurate positioning.
To Next Page
Loading...
