11 |
Operating Instructions:
A 12.5 AMP, 120 Volts, 60 Hz circuit with a properly grounded outlet is required. It is recommended that the fireplace be on
a dedicated circuit, as other appliances on the same circuit may cause the circuit breaker to trip or blow the fuse when the
heater is in operation.
ELECTRICAL SPECIFICATIONS
Voltage: 120 VAC, 60 Hz
Amps: 12.5 Amps
Watts: 1500 Watts
Lighting: LED
Control Panel on the F
ront of Unit:
4. Down Light
5. Log 6.Time
1. Power 2.
Flame 3. Heater
ELECTRICAL CONNECTION:
LED screen
1. On/Off Main Power Button
a. Press to switch the unit
ON/OFF.
b. Child Lock:
turn the unit on and h
old POWER button fo
r at least 5 seconds u
ntil you hear a beep so
und
(and the log
blinks) to enter the C
hild Lock mode. To tu
rn off the Child Lock mode,
please press and
hold the PO
WER button again fo
r at least 5 s
econds until you hear
the beep sound (and
the log
blinks).
2. Adjustable
Flame Brightness
Adjust the fl
ame brightness level: F5 -
F4 - F3 - F2 - F1 - OFF (
F5 being the
brightest and F1 the dimme
st
.
F5 is
the default).
3. On/Off Hea
ter Button
a. Program the thermos
tat. The fireplace can b
e used without the hea
ter if desired.
b. Adjust the te
mperature rating from
62°F - 82°F - ON (17°C
- 27°C).
Note: °F is t
he default unit. To chan
ge from Fahrenheit t
o Celsius: Hold the hea
ter button for approxim
ately
5 seconds. T
he temperat
ure readout will switch
directly from °F to °C a
nd vice versa.
4. Adjustable Down
Light Color
Adjust the Down Light
Color: d0 - d1 -
d2 - d3 - d4 (d0:OFF,
d1:Red, d2:
Orange, d3:Blue, d4:W
hite
).
5. Adjustable Log
Brightness
Adjust the l
og brightness level: L5 - L
4 - L3 - L2 - L1 - OFF (
L5 being the
brightest and L1 the dimm
est. L5 is
the default).
6
. Adju
st
able T
imer
Control
the duratio
n of the he
ater functio
n. Press th
e timer but
ton until yo
u have reac
hed the de
sired durat
ion
time. L
evels: 30 m
in
-
1H - 2H - 3H
- 4H - 5H
- 6H - 7H
- 8H - 9H - OFF.
To Next Page
Loading...
