l
SETTING MECHANISM
Crown position: 0 position
Push the SETTING LEVER gently (refer to the picture on
the right) in order to disengage it from the SETTING
S
TEM. Then pull out the crown with stem completely.
Push here
ql
C
ALENDAR CORRECTOR 1ST INTERMEDIATE WHEEL
qk
WI
NDING PINION
qj
C
LUTCH WHEEL
REMARKS ON DISASSEMBLING AND REASSEMBLING THE MOVEMENT
l HOW TO REMOVE THE SETTING STEM
BEFORE DISMANTLING THE MOVEMENT
t;
YOKE
ta
SETTING LEVER
tl
SE
TTING LEVER JUMPER
To Next Page
