Seiko 4R35A - Finding Correct Watch Parts

PARTS LIST
Cal. 4R35A
7/18
Please refer to the following pages.
Following parts are determined based on the design of watches, such as hands height, dial color,
and design of cases. Please refer to the SEIKO WATCH PARTS CATALOGUE in order to choose
corresponding parts.
1
O
SCILLATING WEIGHT
The type of OSCILLATING WEIGHT is determined based on the design of cases. Check the case
number and refer to the "SEIKO WATCH PARTS CATALOGUE" to choose corresponding OSCILLATING
WEIGHT.
w;
W
INDING STEM 0351***
* For screw down crown models, the stem is assembled to the crown and is not available
separatelly.
qh
●
How to find the correct parts, if not determined by 4 digit caliber number
DIAL HOLDING SPACER
Distinction point
4408 170
4408 171
DIAL HOLDING SPACER of diver’s wach has a distinction point as the above image.
●
DATE DISK
The type of DATE DISK is determined based on the design of cases. Check the case number and refer
to the "SEIKO WATCH PARTS CATALOGUE" to choose corresponding DATE DISK.