Seiko 5d88A - Page 25

Cal.5D88A TECHNICAL GUIDE
ILLUSTRATION AND SPECIAL INSTRUCTIONS ETC.
NO. 4
32-T
31
Mount the
Fix the Dummy
plate by tightening the Calendar plate screw.
Dummy plate
25/51
Fig.16
Fix the Dummy plate to the main plate by
tightening the Calendar Plate screw.<31>
Mount the Dummy plate.
<32-T>
Firmly press down the points of engagement ( “a” and “b” portions)
so that the dummy
Before assembling the case back side of the movement, mount the Dummy plate instead of
a
b
instead of Calendar plate.
Refer to the Fig.16
the Calendar plate.
(The Calendar plate is thicker, and if the Calendar plate is mounted,
the pins on the movement holder cannot come through the holes of the other side of the
main plate and cannot guide the alignment.)
plate is securely mounted.
PROCESS
No.