Seiko 5d88A - Page 35

ILLUSTRATION AND SPECIAL INSTRUCTIONS ETC.
NO. 14
32-T
31
Mount the
Calendar plate
screw.
<32> After removing the Dummy plate, mount
Firmly press down the points of engagement
(217#, 68#)
to securely set it in position.
<31> Fix the Calendar Plate by tightening
Calendar Plate screw (36#).
Target value)
lower than 350gcmTightening torque:
◆
Dummy plate.
Fig.17
Release the Calendar Plate screw.
<31>
a
b
Set the movement
upside down on the Universal
movement holder.
Release the
Calendar plate
Remove the
32
by tightening the
Calendar plate
Remove the Dummy plate.
<32-T>
After assembling the Oscillating weight bridge, turn
plate before starting to assemble the calendar side
over the movement and disassemble the dummy
of the movement.
the Calendar Plate.
screw.
Cal.5D88A TECHNICAL GUIDE
217#
217#
68#
36#
PROCESS
No.
35/51