QUICK START GUIDE
Install the software, Smart Label Creator, as follows before connecting the SMART LABEL PRINTER to your
computer.
©2013-2021 Seiko Instruments Inc. All rights reserved. Specifications are subject to change without notice.
"SII" is a registered trademark of Seiko Instruments Inc. "SMART LABEL PRINTER®" is a registered
trademark and "SmartLabels™" is a trademark of Seiko Instruments USA Inc. Other brand and product
names are trademarks or registered trademarks of their respective holders.
Abbreviations used in this document are as follows:
• SMART LABEL PRINTER® → SLP
• SmartLabels™ → SmartLabels
Host Environments
• Microsoft® Windows® 8 (32 bit / 64 bit)
• Microsoft® Windows® 8.1 (32 bit / 64 bit)
• Microsoft® Windows® 10 (32 bit / 64 bit)
• macOS
TM
10.13 (64 bit)
• macOS
TM
10.14 (64 bit)
• macOS
TM
10.15 (64 bit)
• macOS
TM
11 (64 bit)
Hereinafter, host environments noted above are abbreviated as "Windows" or "Mac".
Installing the Smart Label Creator for Mac
Please download the disc image file (.dmg) from the web page (www.sii-ps.com/slp/).
Double-clicking the downloaded disc image file (.dmg) mounts it on the Mac volume. Start up the installer by
double-clicking the SII Smart Label Printer.pkg file there.
Installing the Smart Label Creator for Windows
Please download the zip file from the web page (www.sii-ps.com/slp/).
Double-click the downloaded zip file to unzip. Start up the installer by double-clicking the Setup.exe file inside
the folder.
EN
To Next Page
Loading...
