Need help?Do you have a question about the Seismic Audio MBG-4000 and is the answer not in the manual?
General| Model | MBG-4000 |
|---|---|
| Type | Power Amplifier |
| Channels | 2 |
| Power Output | 4000 Watts |
| Impedance | 4-8 Ohms |
| Frequency Response | 20Hz - 20kHz |
| THD | <0.1% |
| Input Impedance | 20k Ohms |
| Input Sensitivity | 0.775V |
| Cooling | Fan Cooled |
| Input Connectors | XLR, 1/4" TRS |
| Rack Units | 2U |
| Protection | Short Circuit, Thermal, Overload |
| Output Connectors | Speakon, Binding Post |
| Power Supply | 115V/230V Switchable |
Keep dry, avoid high temperature, sunlight, and foreign objects entering ventilation.
Comply with AC voltage requirements and ensure reliable earth connection for safety.
Avoid operation in places with high electromagnetic fields.
For faults, consult qualified professional personnel for repair.
Input level 0dB, Input resistance 20K ohm, Rising speed 45v/us, Distortion <0.01%.
Signal Noise Ratio >95 dB, Frequency Response 20Hz~20K Hz.
General Harmonic Wave Distortion 20Hz~20K Hz <0.1%.
Output power 1000W/channel (8 ohms), 2000W/channel (4 ohms), 4000W bridge. Operation voltage AC 110V.
Description of front panel controls and indicators including volume, clip, signal, and power indicators.
Details on rear panel inputs, outputs, switches, fuse, and AC input.
Procedure for setting up and operating the amplifier in stereo mode.
Procedure for setting up and operating the amplifier in bridge-mono mode.
List of items included with the amplifier, such as the user manual and spare fuses.
To Next Page